Photo booth software..

[jopetdt]

hi guys! I want to setup a photo booth business.. now, I have almost all the equipment I'll be needing for it (camera, lights, printer, laptop) the only thing i want to inquire about is where I can acquire a proper software for the business? So it will be like the people who would want to get their pictures taken would go to the booth, just press a button and about a minute later, they'll be getting their printouts..  do you guys know who do I talk to so that I can set this up properly? TIA!

• Tweet

[japeeps]

you can try photoboof but a bit expensive
we use nkremote from breezesys around 5-7k per license - I can help you with this

btw heheh ot : do you know where can i get a photo standees?

• Tweet

[anntot]

pwede po ba i customize yung frame? 

• Tweet

[jopetdt]

thanks sir japeeps! medyo pricey nga.. $600.. hmmm.. pero it looks good though..

bout the standees, di ko lang po sure kung san.. although I think you can get cheap ones at divisoria..

• Tweet

[japeeps]

ung breezesys ang pinakamura na na encounter ko and it is what we are using around 6000 petot lang ang license. you can do almost everything sa layout ng photo and the whole photobooth operation.

san kaya particular sa divisoria?

• Tweet

[eos_kiss]

Sir tanong ko lang kung anong printer ang ginagamit nyo kasi I'm also thinking of building a photobooth.

Salamat!

• Tweet

[jaxandzac]

i suggest portable photo printer is best for photobooth, like the selphy...

• Tweet

[den_168]

Hi what particular selphy printer model do you use for this? thanks

• Tweet

[sze1009]

selphy cp760 or cp780... prints almost 1 min.

• Tweet

[eos_kiss]

mga bros other than selphy and Hiti... meron pa bang in between nung dalwa?

Salamat po!

• Tweet

[sze1009]

DNP ds-40 from japan, can print matte/glossy finish without changing paper and ribbon cost around 100k.

• Tweet

[japeeps]

im using ip3680 prints 49secs per 4r prints got it for less than 5k sa canon
you cah also use ip4680 around 20sec per print less than 7k not sure.
or printers from aperture Hiti can print 9 sec per 4r prints kaso sobrang mahal.

I suggest go for the printer than can print fast and mura ink kase ikaw din maiinis pag madaming nag rereklamo sa paligid mo na "antagal naman ng prints ko" especially mga oldies na di makapag antay. ( i experience this sa isang wedding I explain to them pero makulit pa din, one of them even pull out the paper sa printer baka daw nandun yug print nya, sabi ko blanko po lahat yun kase dun ipriprint yung copy nila heheh).

Forget about the portability ng printer kase yung ibang gamit mo di naman portable like the lights so why bother sa laki ng printer na dadalin. the faster the printer the better.

• Tweet

[nickster]

japeeps, naka ciss ka ba or canon inks?
anong photo paper gamit mo?


naka selphy lang kasi ako ngayon. maganda talaga quality ng prints kaso mabagal. so far wala pa naman nagagalit pero hindi ko na paabutin sa point na yun. haha

• Tweet

[sze1009]

if your using inkjet printer, need mo pang patuyuin before mo bigay sa guest and pag nabasa sira na yung print...

ok naman selphy printer, i used two selphy printer kaya wala gaano waiting...

• Tweet

[nickster]

kaya ba kung 2 selphy ang sabay nakakabit sa isang laptop?

• Tweet

[japeeps]

Ip3680 base on experience hinde na kailngan patuyuin.. once pag labas ng picture sa printer tuyong tuyo na. wala ding nag report na nasira yung picture kase basa pa..

For the last event, using breezesys, para masulit kase friend ko yung ng kumuha sakin. Tuloy tuloy lang yung shoot then antay nalang sila lumabas yung prints nila. umabot sa 30 yung queue sa print. around 200 prints yung na produce in 3hrs ng event. kase pag inantay ko pang ma print yung bago kunan yung susunod around 100 lang yung mapriprint. bale free extra 30 mins lang parang ma print lahat. If selphy yung ginamit baka mas konti lang maprint lugi sau yung nag rent. at the same time mahal ang cartridge ng selphy. anyway this is just may experience.

• Tweet

[nickster]

yun nga eh, ayoko naman sana feeling ng customer ko lugi sila sa bagal ng printouts. hehe.

na-time mo na ba kung ilang seconds yung 4R ng ip3680? maganda ba print niya kahit ciss?

• Tweet

[sze1009]

pwede 2 selphy printer, spool mo lang sya para pwede print alternately... kahit tuloy tuloy yung pila sa booth mo 1 lang ang nakaqueue sa printer, based on my experience kuha na nila yung prints pagkatapos magshoot ng kasunod nila...

• Tweet

[jjdee]

pwede 2 selphy printer, spool mo lang sya para pwede print alternately... kahit tuloy tuloy yung pila sa booth mo 1 lang ang nakaqueue sa printer, based on my experience kuha na nila yung prints pagkatapos magshoot ng kasunod nila...

sir paano po ma-set for alternate printing? and pwedeng po bang different printers? like isang selphy then the other espson?

then any suggestion po kung saan po pwede magpagawa po ng box for photobooth? thanks in advance sir.. 

• Tweet

[japeeps]

49 sec per 4r. ok naman ang prints sa orig ink pero I haven't tried CISS sa ip3680.

• Tweet